Tag Archives: Frequency Transformer

Festo release valve manifold control the proportional valve regulator

Festo has launched a valve manifold mounted directly on the site control proportional valve regulator, so that the control more flexible.

New VPPM-MPA proportional pressure regulator valve manifold by providing changes to the pneumatic actuator pressure air supply means for precise control of speed, power, pressure and torque. VPPM-MPA proportional pressure regulator with a 1 / 8 inch proportional pressure regulators, and provide 0-2bar ,0-6bar or 0-10bar pressure range. 0-10bar model to adapt to 1400l/min the following traffic. Programmable functions include setpoint, upper and lower limits, and a response distribution with three preset making it easy to fine-tune the system without having to install complex PID loops. Programmed setpoint and the actual pressure value can be local or remote monitoring, the user can select the pressure units bar, MPa or psi. Regulator to return through the fieldbus or Ethernet comprehensive diagnostic data, and with a front panel LED to indicate power and operational status. Festo s VPPM-MPA proportional pressure regulator can be on the same manifold with free standard and proportional valves.

Tagged , , | Leave a comment

SKF launched Jaeger IA4A / B AC linear regulator

SKF introduces new AC line conditioner Jaeger IA4A / B, the series used in urgent need of AC power products for industrial applications to achieve optimal performance and reliability to the use of effective engineering and manufacturing advantages. Products to enhance corrosion resistance and increased efficiency characteristics of the ring seal products in the harsh environment industrial applications operating under protection.

Which Jaeger IA4A / B linear regulator in the broader use of suitable temperature conditions, operating temperature range from minus 26 degrees to 65 degrees above zero change. Static load capacity ranging between 4500N to 13600N, with a value depending upon product type, in addition, the extended length of the product standard 100 mm to 600 mm changes.

Acme thread with new Jaeger IA4A products to achieve a full load speed of 25mm / s and sliding mode 2300N force. Highly efficient ball screw IA4B products provide full load speed of 46mm / s, and get in push-pull mode 6000N force. All models in the series are 25% load factor.

Tagged , , | Leave a comment