1. Overview:
Isolation transformers and Auto Transformer and electrical equipment of various power supply the main components, the Company adopted advanced production technology, imported Spanish winding machine and a full vacuum pressure dipping equipment; windings are born out of an entire column winding method; on the transformer Vacuum Impregnation, the transformer insulation class F or H grade to grade. The output and input voltage transformer according to design. Single phase, three-phase or multi-channel input and output and other specifications, the maximum rated power to 200KVA.
The company's transformer design, production more than 20 years of history, for the exchange of 50Hz to 400Hz, voltage of 1000V the following circuit, widely used for lighting, electrical machines, machinery and electronic equipment, medical equipment, rectifier devices. Performance can meet the special requirements of various users.


2. Features:
With a voltage transformation functions (such as: △ / Yo or Yo / △ connection)
Interference with filtering functions (eg: You can remove the third harmonic)


3. isolation transformer in power supply in a typical application cases:
Isolation transformer in the AC power input characteristics:
1, if the third harmonic and the interference signal power more serious, the use of Power Transformer, you can remove the third harmonic and reduce signal interference.
2, the use of isolation transformer can generate a new neutral line, to avoid the adverse cause the device to power neutral line is not running properly.
3, the nonlinear load current waveform distortion caused (such as third harmonic) can be isolated without contamination grid.

Isolation transformer in the AC power output characteristics:
1, to prevent distortion of the current non-linear load to the AC power grid work and the pollution, purify the role of the grid.
2, sampling the input isolation transformer, making the nonlinear load current distortion does not affect the accuracy of sampling, are able to reflect the actual situation of the control signal.
3, if the load imbalance does not affect the normal operation of power supply.